Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Florin
Gate repair in Florin usually splits into two jobs: mechanical work on the gate itself, and electrical work on the operator that moves it. We handle both. If your slide gate drags across the driveway every summer, or a swing gate stops mid-arc and the opener just clicks, that’s what we fix most days across the 95828 zip code. We run calls off Stockton Blvd, through the ranch-home streets east of the 99, and out toward the county pockets south of Fruitridge. Call (833) 620-4636 and we’ll get a technician headed your way.
Why Gate Repair Del Paso Park Is Florin’s Preferred Gate Repair Company
We’re Gate Repair specialists, not a fence company that also tinkers with openers. Every truck we send into Florin carries gate-specific parts, not whatever’s left from a deck job. That matters when a control board from a 1990s Linear operator fails on a Tuesday and the gate is stuck half-open across the driveway.
Florin homeowners call us because we work on the brands already bolted to their posts. LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, Mighty Mule. Nine factory-familiar brands, from entry-level Mighty Mule swing arms to commercial DoorKing slide operators. We repair what’s there before recommending replacement. Rodney Caldwell leads our service team, and he’s particular about that repair-first approach: the cheapest fix that actually holds is the one we quote first.
We know Florin’s gate stock. Mid-century chain-link drive gates, ornamental iron swing gates from the 1970s, manual sliding gates that have been dragging for a decade. Most calls come from homes built between the 1950s and 1980s, where the original gate is still standing but the ground beneath it has shifted. That experience means we quote accurately and show up with the right parts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Wrought Iron Gate Repair in Florin
Wrought iron gate repair in Florin almost always starts at the hinge post. These gates were built heavy, hung on posts set decades ago, and they’ve been cycling through Central Valley summers and wet winters since the day they went in. The iron itself rarely fails; the ground under the posts does.
A typical wrought iron gate repair in Florin runs $240 – $460 for hinge replacement and post re-plumbing, depending on whether we’re resetting one post in concrete or both. If the gate has sagged enough to scrape the driveway, we’re looking at sag correction and hinge line work, usually $180 – $320. Broken ornamental pickets or cracked welds add $80 – $150 per section depending on how much fabrication is involved. We quote it all before we touch anything.
Hinge and Post Work
When a Florin homeowner tells us the gate won’t latch in August but swings fine in January, we know it before we arrive: the post is heaving in unamended Valley clay. The fix is resetting the footing, not swapping the latch. We dig out the old footing, set the post in concrete that goes below the shrink-swell zone, and re-plumb the hinge line so the gate clears year-round.
Weld and Rust Repair
Wrought iron gates in Florin sit through 100-degree summers and rain-soaked winters. Surface rust is normal; structural rust at the weld points is the real problem. We grind back the failed welds, weld fresh joints, and dress the repair so it matches the original profile. If the lower rail is swiss-cheesed from years of irrigation overspray, we’ll tell you straight whether patching buys you five more years or replacement costs less in the long run.
Metal Gate Repair in Florin
Metal gate repair in Florin covers everything from chain-link drive gates that catch on the track to steel tube swing gates that sag and strike the latch post. These are the working gates of Florin’s older lots, and most of them are still doing daily duty decades after installation.
Basic metal gate repair in Florin runs $160 – $340 for track realignment, roller replacement, and hinge tightening on a chain-link gate or a light tube gate. Heavier steel slide gates with bent frames run $280 – $520 depending on how much straightening and re-welding the frame needs. If the track itself is bent or pulling out of the concrete, we’re at $350 – $600 to reset and re-anchor it. Those are Florin-market numbers, quoted before work starts, and they don’t change when the invoice arrives.
Slide Gate Track and Roller Work
Florin’s slide gates live or die by their track. When gravel, clay dust, and years of low-speed grinding wear the rollers flat, the gate rides on the track and jumps the v-groove. We replace rollers, realign the track, and shim the posts back to level. Most slide gate repairs are done in one visit.
Latch and Lock Replacement
A metal gate that won’t stay closed is a gate that bangs in the wind and beats up its own hinges. We replace worn slam latches, re-plumb the strike post, and when the homeowner wants it, convert manual latches to keyed locks or integrate them with an existing gate operator. On older Florin gates, the latch post is often the one that’s moved, so we fix the post before we bolt on new hardware.
Trusted Brands We Service in Florin
We work on your brand, not just gates in general. That matters when a Ghost Controls opener loses its limit settings or a DoorKing slide operator throws a fault code and locks the gate mid-cycle. We carry boards, remotes, receivers, and sensors for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Florin customers, that means shorter turnaround: we’re not waiting on a distributor in another county when a common part fails. If you’ve got an Elite commercial swing operator or a Mighty Mule on a backyard gate, one call covers it.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Florin Homes
- Seasonal post heaving. Florin’s older lots sit on unamended Valley clay that shrinks in summer and swells in winter. Gates drag every August and swing free every February; the post footing, not the gate, is the fix.
- Obsolete operator boards. LiftMaster and Linear openers from the 1990s and early 2000s fail after years of heat cycling. When the board goes, the gate stops mid-travel or refuses to respond to the remote. We retrofit or replace based on what’s genuinely cheaper over five years.
- Safety sensor gaps. Pre-UL325 gates installed before 2000 often lack photocells or edge sensors entirely. A gate that reverses on a car bumper but not on a child is a hazard most Florin homeowners don’t know they have until we point it out.
- Sagging hinge lines. Wrought iron and steel tube gates on aging posts pull the hinges out of plumb. The gate scrapes the driveway, the latch misses, and every cycle adds more stress to the welds.
Pricing for Gate Repair in Florin, CA
Here’s what we charge in Florin, in plain numbers. Post resetting and re-plumbing: $240 – $460. Weld and rust repair: $80 – $150 per section. Track and roller realignment: $160 – $340. Control board replacement on a legacy LiftMaster or Linear: $280 – $520 installed. Safety sensor retrofits: $150 – $300 per gate. Full operator replacement, when the old one isn’t worth saving: $700 – $1,300 depending on brand and gate size. Every job is quoted and agreed before work starts, and the quote doesn’t change unless we find something structural after opening things up, in which case we call before doing anything else.
Call (833) 620-4636 for a free estimate. We’ll tell you what’s fixable, what’s chewing money, and what replacement actually costs, with no pressure either way.
We Also Serve Cities Near Florin
We run the same repair-first approach through Florin and the surrounding county pockets. Point West, North Sacramento, Del Paso Park, and West Sacramento get the same brand-specific service and the same straight pricing. If your gate is acting up and you’re anywhere along the 99 corridor or south Sacramento County, call (833) 620-4636.
Serving Florin, CA – Our Local Coverage Area
We’re based in the Florin area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Florin
Most gate repairs in Florin don’t need a permit because Florin is unincorporated Sacramento County, and county code applies rather than a city permitting office. Repairs to existing gates, post resets, operator swaps, and hinge work typically fall under routine maintenance. New gate installations that change the footprint or add a driveway approach may need county review for setback and safety rules. We’ll tell you on the estimate call whether your job triggers anything.
Your hinge post is set in unamended Valley clay, which is the norm across Florin’s older lots. The clay shrinks when it dries out in summer and swells when winter rains soak it. That cycle lifts and drops the post, so the gate’s ground clearance changes with the seasons. The fix is resetting the post in a deeper concrete footing below the shrink-swell zone, not adjusting the hinges or shaving the gate.
Yes. If your gate operator predates UL325 standards, it may not have photocells or edge sensors, and that’s an entrapment hazard. We retrofit current-sensing, photo eyes, and contact edges onto legacy LiftMaster, Linear, and other operator boards. Cost in Florin runs $150 – $300 per gate, and it brings your gate up toward current safety expectations without replacing the operator.
Sometimes the board can be rebuilt, but more often the practical answer is a retrofit or full replacement. Old LiftMaster and Linear boards fail from years of heat cycling in Florin’s summers, and obsolete boards aren’t made anymore. If we can install a current board that matches your operator, we do that: $280 – $520 installed. If the operator is too old to retrofit, a replacement runs $700 – $1,300. We’ll show you both numbers and give you a straight recommendation on which one buys you more years for less money.
Seasonal post heaving on gates set decades ago in unamended clay. It shows up as a gate that drags all summer, clears in winter, and slowly tears the hinges apart. We saw it on a ranch-style home off Stockton Blvd where a manual slide gate had been dragging every summer for years; the gate operator was a vintage LiftMaster, but the real problem was the hinge post. We reset the post footing, re-plumbed the hinge line, and corrected the sag. No hardware swap, and the gate clears year-round now.
Written by Rodney Caldwell, Owner at Gate Repair Del Paso Park, serving Florin and the surrounding Sacramento County communities.