Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across North Highlands
Electric gate repair in North Highlands typically costs $225 – $640 for motor and control board work, with most jobs completed in a single visit. Our technicians know the 95660 ZIP code well, including the tight lots and aging mid-century gates that define this part of Sacramento County. If your gate is stuck, grinding, or refusing to respond to the remote, call (833) 620-4636 for a straight answer and a free estimate.
We’re based in Del Paso Park, which puts us minutes from North Highlands homes off Watt Avenue, Don Julio Boulevard, and Hillsdale Boulevard. That proximity means we can usually reach you the same day you call. More importantly, we know what’s failing on gates in this specific area, because we see the same problems week after week: post heave from clay soil, heat-stressed operators, and hardware that’s been in service since the Eisenhower administration.
Why Gate Repair Del Paso Park Is North Highlands’s Preferred Electric Gate Repair Company
North Highlands homeowners deal with a specific set of gate failures that general fencing contractors rarely diagnose correctly. The expansive clay soil under this part of the Sacramento Valley moves more than most people realize. When it rains in November, that soil swells and pushes against shallow footings. Gates drag, latches miss, and electric operators burn out trying to force a gate that isn’t hanging square anymore. We understand that, because we’ve repaired enough of these to recognize the pattern immediately.
Our Electric Gate Repair team carries control boards, limit switches, photocells, and remotes for the systems North Highlands residents actually use. We don’t make you wait for parts to ship from a distributor. We also don’t push replacements when a repair makes more sense. Our repair-first approach keeps older but serviceable gates running, which matters when you’re dealing with a custom iron gate that would cost thousands to replicate.
Being a single-trade gate shop matters. Every technician, every vehicle, every stocked part is oriented around gates and gate automation only. That’s different from a fence company that installs gates as a side business or a garage door outfit that occasionally touches a driveway gate. When you call us about a FAAC operator that won’t close or a Ghost Controls keypad that stopped responding, you’re talking to someone who works on those systems regularly, not someone reading a manual for the first time.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Electric Gate Motor in North Highlands
An Electric Gate Motor repair in North Highlands usually means one of three things: a burnt-out capacitor from repeated strain against a misaligned gate, a failed limit switch that doesn’t know when to stop, or a gearbox that’s been ground down by years of forcing a sagging gate. We diagnose the actual fault before replacing anything. A motor that hums but won’t move is often a bad capacitor, which costs around $120 – $180 to replace. A motor that runs but slams the gate is usually a limit switch, typically $90 – $150. A stripped gearbox on a residential swing gate runs $260 – $480 depending on the operator brand.
Operator Strain From Misaligned Gates
In North Highlands, the biggest killer of electric gate motors isn’t age. It’s misalignment. When a post heaves or a hinge wears, the gate starts fighting the operator. The motor works harder, heat builds, and components fail. We always check gate alignment before and after motor work, because replacing a motor without fixing the alignment just means we’ll be back in six months.
Heat-Related Motor Failure
July in North Highlands regularly hits 102°F, and that heat does real damage to gate operators. Metal housings expand, circuit boards overheat, and older capacitors dry out faster. If your gate runs fine in the morning but stalls by mid-afternoon, heat is likely the culprit. We stock motors and capacitors rated for Sacramento Valley summers.
Gate Access Control in North Highlands
Gate Access Control in North Highlands covers the electronics that decide who gets in: keypads, intercoms, vehicle detection loops, safety photocells, and remote receivers. When a keypad stops accepting codes or an intercom won’t ring through to your phone, you’re dealing with an access control problem, not a mechanical gate problem. Repairs here in North Highlands typically run $140 – $380. Keypad replacement is usually $150 – $250 installed. Photocell replacement runs $90 – $160 per set. A new vehicle loop detector, which is common for commercial properties in the area, runs $280 – $450.
Retrofitting Safety Features to Older Systems
Many North Highlands homes still have electric gates installed in the 1980s or 90s, before UL 325 safety standards became standard. Those systems often lack photocells or contact edges. Retrofitting a photocell and edge sensor to an existing gate costs $220 – $400 total, and it brings the gate up to current safety requirements. This matters for homeowners, but it matters even more for small commercial property managers around North Highlands who have liability exposure on access-controlled entrances.
Keypad and Remote Systems
A dead keypad doesn’t always mean a dead keypad. Sometimes the wiring from the keypad to the control board has corroded, especially on gates near sprinkler systems or along Roseville Road where irrigation overspray is common. We test the control board first, then the keypad, then the wiring. That sequence avoids selling you a new keypad when the real fault is a $10 connector.
Trusted Brands We Service in North Highlands
We work on your brand, not just gates in general. Our technicians carry factory-level knowledge for DoorKing and Elite systems, which are common on older custom gates throughout North Highlands, plus Ghost Controls and Mighty Mule, which show up on many DIY and retrofit installations in the 95660 ZIP code. We stock control boards, remote receivers, and keypads locally, so a North Highlands repair doesn’t turn into a two-week parts wait. From a stuck residential Mighty Mule to a commercial DoorKing access system on a North Highlands office property, we’ve seen it.
Common Electric Gate Repair Problems We See in North Highlands Homes
- Post heave after first rains. The expansive clay under North Highlands swells when the November rains arrive, and posts set only 18 inches deep get pushed out of square. Gates that latched fine in October suddenly drag or miss the latch entirely by December.
- Heat-stuck metal gates in summer. Wrought iron and steel expand in 100°F+ heat. A gate that clears the latch in the morning can bind by 3 p.m., which strains the motor and trips overload circuits.
- Worn 1950s-60s hinge hardware. Original hinges on mid-century North Highlands gates are often corroded beyond adjustment. When a hinge sags, the operator has to lift the gate’s entire weight on every cycle, and that’s how gearboxes die early.
- Non-standard gate widths and custom fitting. Tract homes from the 1950s and 60s didn’t always follow modern driveway dimensions. We regularly rebuild or retrofit gates that are 14 to 18 feet wide, which is wider than most stock replacements sold today.
See the difference
Before
After
Before
After
Before
AfterPricing for Electric Gate Repair in North Highlands, CA
A typical electric gate repair in North Highlands runs $150 – $200 for a basic diagnostic and minor fix like a limit switch adjustment or remote reprogramming. Motor replacement lands between $350 and $640 including labor, depending on whether it’s an AC swing operator or a DC sliding gate motor. Control board replacement runs $280 – $520. Keypad replacement is $150 – $250. Photocell pair replacement is $90 – $160. Everything is quoted and agreed before any work starts, so the invoice you see matches the number we gave you on the phone. Call (833) 620-4636 for an exact quote on your gate. Estimates are free.
Key takeaways:
- Most North Highlands electric gate repairs are completed in one visit.
- We repair all nine major operator brands, including DoorKing, Elite, Ghost Controls, and Mighty Mule.
- Seasonal post heave and summer heat are the two biggest gate killers in the 95660 ZIP code.
- Price is always quoted and agreed before work begins.
We Also Serve Cities Near North Highlands
We serve the full North Highlands area including homes off Watt Avenue, Don Julio Boulevard, and the neighborhoods around McCloud. Beyond North Highlands, our team regularly handles electric gate repairs in Foothill Farms, Del Paso Park, Antelope, and Robla. If your gate is acting up and you’re anywhere in the northern Sacramento Valley, give us a call before you assume you need a full replacement.
Serving North Highlands, CA – Our Local Coverage Area
We’re based in the North Highlands area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in North Highlands
Your gate post likely heaved. North Highlands sits on expansive clay that swells when the first November rains soak in, and most original posts were set only 18 inches deep. That shallow footing can’t resist the swelling soil, so the post tilts, the gate drags, and the operator either stalls or burns out. We re-set posts at 36 inches with proper concrete, which is the permanent fix for this specific problem. Call (833) 620-4636 and we’ll confirm the diagnosis on site.
Twice a year, ideally in late spring before the summer heat and again in late fall before the first rains. North Highlands’s seasonal extremes, 100°F summers and wet winters on expansive clay, make annual service insufficient. A twice-yearly check catches post movement, heat fatigue, and hinge wear before they take out an operator. Call us at (833) 620-4636 to schedule a seasonal service visit.
Yes. Most North Highlands gates built before about 2001 lack UL 325-compliant safety devices like photocells and contact edges. We retrofit these to existing gates for $220 – $400 total, which brings your gate in line with current safety standards and prevents the crushing injuries these standards were written to stop. This is a repair we strongly recommend for any older electric gate in the 95660 ZIP code. Call (833) 620-4636 for a free assessment.
We repair all nine major gate-operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers everything from entry-level DIY systems to commercial-grade automation. In North Highlands specifically, we see a lot of DoorKing, Elite, Ghost Controls, and Mighty Mule units, and we carry parts for all of them locally. Call (833) 620-4636 and tell us your brand; we’ll tell you what the likely fault is before we even arrive.
Yes. We diagnose keypad faults by testing the control board, the keypad itself, and the wiring between them, in that order. In North Highlands, corroded wiring from sprinkler overspray is a common culprit, and replacing a keypad without checking the wire just wastes your money. Keypad replacement runs $150 – $250 installed. Call (833) 620-4636 and we’ll find the real fault.
Contact Gate Repair Del Paso Park for North Highlands Electric Gate Repair
If your electric gate is stuck, grinding, or refusing to open, don’t force it. Call Gate Repair Del Paso Park at (833) 620-4636. We’ll answer, ask the right questions, and give you a straight price before we send a technician to your North Highlands home. Free estimates, same-day service in most cases, and a repair-first approach that saves the gate you already own.
Written by Rodney Caldwell, Owner at Gate Repair Del Paso Park, serving North Highlands and surrounding Sacramento Valley communities.