Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Roseville
Gate repair in Roseville usually means one of two things: a gate that won’t open, or a gate that won’t stay square. We handle both. If your driveway swing gate is sagging in 95747 or your pedestrian gate in old-town 95678 has seized at the latch, call us at (833) 620-4636 and we’ll walk you through what’s wrong before we even dispatch. We run calls into Roseville neighborhoods all week, and most repair jobs in the city get a same-week appointment, often sooner.
Why Gate Repair Del Paso Park Is Roseville’s Preferred Gate Repair Company
Roseville homeowners call us because we work on the gate they actually have, not just whatever’s easy to replace. That matters here more than most cities. The west Roseville expansion went up fast in the 1990s and 2000s, and builder-grade hardware from that era has aged out on a predictable schedule. Our technicians see the same failing models house after house, so we already know the fix before we start.
We stock parts for the systems Roseville was built with. LiftMaster operators from the first generation, Viking and DoorKing boards, hardware that’s been discontinued at the supply houses but still lives on hundreds of local gates. That means less waiting on parts and fewer trips back and forth.
We’re a dedicated Gate Repair shop. No fencing side work, no garage-door division. Just gates, automation, and the welding that keeps them standing. That single-trade focus shows up in how fast we diagnose a Roseville gate and how few callbacks we run.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Driveway Gate Repair in Roseville
Driveway Gate Repair in Roseville is the bulk of what we do in the newer subdivisions, and it almost always comes down to the same pattern: the hinge post has pulled loose from a shallow footing, the panel sags toward the latch side, and the operator burns itself out trying to move a gate that no longer swings true. We reset the post, weld or bolt the hinge side back into position, and get the operator running again.
For a typical driveway swing gate repair in Roseville, you’re looking at $280 – $650 depending on whether the post needs resetting, the panel needs welding, or the operator needs a control board. A full operator replacement runs higher, but we quote that before any work starts.
Post Footing and Hinge Work
The hinge post is the root cause on most sagging driveway gates in Roseville’s 95747 tract. Builder footings from the 1990s-2000s boom were often shallow, and two decades of Central Valley heat and winter rain loosened them. We dig, reset, and re-anchor the post before touching the panel, because welding a gate onto a moving post just means it’ll sag again next season.
Operator Repair and Matching
When the original operator quits, we check the brand and model before suggesting anything. In west Roseville we routinely find LiftMaster repair in Roseville needs and Mighty Mule first-generation units that were discontinued years ago. We can often replace the board or the limit switch and keep your existing opener running, rather than forcing a full system swap.
Gate Welding in Roseville
Gate Welding in Roseville covers everything from a cracked weld on a wrought-iron pedestrian gate in 95678 to the hinge-side repair on a builder-grade driveway panel in 95747. Heat and time do real work on steel here. Weld seams crack, hinge barrels tear loose, rust eats unprotected steel, and a gate that was hung square twenty years ago starts racking out of shape.
Welding repairs on Roseville gates typically run $180 – $420 for a hinge re-weld or crack repair. A full racking realignment with multiple heat and pull corrections lands higher, especially on ornamental iron where we’re keeping the original pickets and scrollwork in place.
Wrought Iron and Ornamental Gates
Older Roseville bungalows in 95678 and parts of 95661 have ornamental iron pedestrian gates that were never painted on the inside of the hinges. Rust works from the hidden surfaces out. We grind back to clean steel, weld the cracks, and reinforce the hinge plates so the gate hangs square again.
Panel Straightening and Reinforcement
A builder-grade single-panel driveway gate that’s sagged for years often has stretched hinge welds and a tweaked frame. We weld reinforcement plate to the hinge side rather than just re-welding the same thin section, so the repair outlasts the original build. Then we set the panel and adjust the operator stops.
Trusted Brands We Service in Roseville
Our technicians are factory-familiar with nine gate-operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. For Roseville homes, that translates directly into faster diagnosis. If your Viking operator hums but won’t move, or your Ghost Controls board drops its remote pairing, we’ve seen that exact failure before. We repair what’s installed rather than pushing a replacement, and we keep parts for the brands Roseville was actually built with on the truck and in local stock, so most jobs finish in one visit.
Common Gate Repair Problems We See in Roseville Homes
- Builder-era swing gates sagging at the post in 95747: Same model, same street, same failure. The shallow footings from the 1990s-2000s build wave let the hinge post lean, and the panel drops toward the latch.
- First-generation openers dying in summer heat: Original operators from the Roseville boom are hitting end of life. Control boards overheat, capacitors fail, and the unit gives up when the gate binds.
- Wood and vinyl side-yard gates swelling and warping: Winter rain expands the panels; summer heat dries and twists them. Latches stop lining up, and sliding panels bind in tracks alongside tight shared driveways.
- Rusted wrought-iron pedestrian gates in older 95678 homes: Unprotected steel at hinges and scroll joins rusts through after decades of seasonal moisture, and the gate racks out of square.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Roseville, CA
Gate repair pricing in Roseville is dictated by what actually failed, and we give you the number before we start. Here’s what Roseville homeowners typically pay, based on the work we run most weeks:
- Hinge post reset and re-anchor: $260 – $480
- Gate welding, hinge-side repair: $180 – $420
- Operator control board replacement: $230 – $390 plus the board
- Latch replacement and realignment: $120 – $250
- Full operator replacement with new safety sensors: $700 – $1,400
Every quote is agreed in writing before we touch the gate. No discovery charges, no surprise line items. Call (833) 620-4636 for a free estimate, and we’ll give you a range based on photos and a description before we schedule the truck.
We Also Serve Cities Near Roseville
Our Gate Repair in Roseville service area extends to the surrounding communities. We run calls into Rocklin, Citrus Heights, Antelope, and Foothill Farms throughout the week. If you’re on the edge of Roseville in one of those cities, call us and we’ll tell you honestly when we can be there.
Serving Roseville, CA – Our Local Coverage Area
We’re based in the Roseville area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Roseville
Yes. We’re deeply familiar with the builder-issued gates and first-generation openers that went into west Roseville’s 95747 subdivisions during the 1990s-2000s expansion. In fact, we often find the identical gate and operator model failing house after house on the same street, and we keep the discontinued hardware and compatible parts on hand so we can match the original installation rather than rip it out. Call (833) 620-4636 and tell us your street and gate type; odds are we already know the model.
Yes, and Roseville’s tight shared driveways are exactly why we do so many slide gate conversions. A slide gate rides along the fence line instead of arcing into the driveway, so it fits where a swing panel would block a neighbor’s access or hit a planter. The conversion usually means adding a track or cantilever frame, a slide-rated operator, and safety sensors at both ends. We measure, quote, and schedule the work so access stays open at least one side during the switch.
Yes, in almost every case. We prop, brace, or temporarily release the panel so you can still open it by hand while we work. For operator failures, we keep the gate functional while diagnosing and replacing parts. The one exception is a post reset where leaning a gate against a moving post risks the panel; in that case we brace it securely and tell you the timeline before we start. Access through the work is always part of the quote.
Usually the post. Roseville’s summer heat expands and shifts the footing soil, and the loose hinge post lets the panel drop until it drags on the latch side and misses the catch. The panel itself is rarely the problem unless it’s racked out of square. We check the post with a level, confirm the movement, then reset and re-anchor the footing if it’s shifted. For an exact price to fix it, call (833) 620-4636 and send us a photo of the gate and the gap at the hinge post.
Yes on both. Automatic and electric gates in Roseville require functioning safety sensors, usually photo-eye beams or contact edges, and a gate that will stop and reverse under resistance. We service all nine brands we carry parts for, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. If your gate has sensors that are missing, misaligned, or bypassed, we bring it back to code before we finish the repair.
Call Gate Repair Del Paso Park for Roseville Gate Service
If your gate is sagging, seized, or dead at the operator, call (833) 620-4636. We’ll talk through the symptom, give you a straight price range, and get a technician out to your Roseville home with the right parts. Free estimates, upfront pricing, and repairs quoted before work starts.
Written by Rodney Caldwell, Owner at Gate Repair Del Paso Park, serving Roseville and surrounding communities.