Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Antelope
Electric gate repair in Antelope, CA typically runs $180 – $340 for most operator, hinge, and sensor fixes, and we can usually have a technician to your neighborhood the same day you call. If your gate is stuck open, dragging on the driveway, or the motor hums but nothing moves, call (833) 620-4636 and we’ll walk you through what’s happening before we even dispatch. We work the 95621 and 95843 ZIPs every week, so we know the streets, the gate styles, and the failure patterns here.
We’re Electric Gate Repair specialists, not a fencing crew that also does gates. That matters in Antelope because the tract homes here share the same original hardware, and we know exactly how it fails. From Antelope Road to the streets around Antelope High School, we’ve seen the same builder-grade hinges give out on the same model homes block after block.
Why Gate Repair Del Paso Park Is Antelope’s Preferred Electric Gate Repair Company
Antelope homeowners call us because we show up knowing their gate. We’re based out of Del Paso Park, so we’re minutes from the 95621 and 95843 neighborhoods, not an hour away. When your gate won’t close and your driveway sits open to the street, that response time matters.
Our technicians carry a deep working knowledge of nine gate-operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That’s not a marketing list. It means the technician at your Antelope property has probably rebuilt the exact operator on your post before, and likely has the part on the truck. We work on your brand, not just gates in general.
We’re a single-trade shop. Every call we take, every part we stock, every technician we send is gate-specific. No splitting focus between fences, garage doors, and whatever else. That’s how we diagnose a control board fault on a LiftMaster in Antelope faster than a generalist who sees one every few months.
Led by Rodney Caldwell, our crew repairs what’s already installed before recommending a replacement. If your builder-grade swing gate is sagging, we’ll re-set the hinge post and upgrade the hardware rather than pushing a whole new gate. That repair-first approach has built our reputation in Antelope’s tract neighborhoods, where the original gates are all aging at the same rate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Electric Gate Motor in Antelope
Electric gate motor repair in Antelope usually means diagnosing why a motor that worked fine for 15 years suddenly strains, stalls, or stops responding. The operator itself may be fine while the real problem is a sagging hinge putting load on the motor, a corroded connection, or a sensor misaligned from a gate that’s shifted. We test the whole system, not just the motor, because in Antelope’s 25-to-35-year-old housing stock, the motor is rarely the only thing wearing out.
A typical electric gate motor repair in Antelope runs $220 – $380. A full motor replacement on a residential swing or slide gate starts around $450 and goes up based on the operator brand and capacity. We quote the price before any work starts, and that’s the number you pay.
Call (833) 620-4636 and tell us the brand on the control box. We’ll bring the right parts, not guesswork.
Motor Diagnostics and Control Board Issues
When a motor runs but the gate won’t move, the fault is often the control board, a capacitor, or a failed limit switch. On LiftMaster and FAAC units in Antelope, we commonly see boards damaged by power surges during valley thunderstorms and winter storms. We bench-test boards, check capacitor health, and replace only what’s actually failed.
Strained Motors from Sagging Gates
This is the Antelope-specific failure we see most. Wood gates warp in the summer heat and sag at the hinge post, which throws off the operator’s travel path and forces the motor to work against the gate’s weight. We fix the mechanical problem first (re-set the post, replace the hinges), then realign the operator so the motor runs without strain. If we skip the hinge repair, the motor burns out again in a year.
Gate Access Control in Antelope
Gate access control in Antelope covers the keypads, remotes, intercoms, loop detectors, and safety sensors that tell your gate when to open and when to stay put. When the access control fails, you either can’t get in your own driveway or the gate won’t hold closed against the street. We diagnose and repair the full access system, not just the moving parts.
Keypad and remote repair in Antelope typically runs $90 – $180 for programming, receiver replacement, or wiring repairs. Adding a new wireless keypad or a phone-entry system for a property in the 95621 area generally falls between $250 and $600, installed. Every quote is written and agreed before we touch a wire.
Keypad, Remote, and Intercom Repair
If your keypad stopped working after a wet winter, the likely culprit is corrosion at the keypad or the underground wire run feeding it. Antelope’s tule fog and irrigation overspray do real damage to low-voltage wiring. We trace the wire, find the fault, and splice or re-run the line so your entry code works again.
Safety Sensors and Loop Detectors
Automatic gates in California must have functioning safety devices: photocells, edge sensors, or loop detectors that stop and reverse the gate if something is in the way. We test every safety device as part of any Electric Gate Repair in Antelope visit, and we align or replace sensors so your gate actually stops for a car, a kid’s bike, or a delivery truck. A gate that doesn’t reverse is a liability, not just an annoyance.
Trusted Brands We Service in Antelope
We’re factory-familiar with the systems Antelope homeowners actually have installed. That includes LiftMaster operators with MyQ accessories, FAAC and BFT hydraulic and electromechanical units, Linear boards and receivers, Viking loops and photocells, Ghost Controls and Mighty Mule systems on the DIY end, and DoorKing and Elite commercial operators for small access points and small businesses. We stock common parts for these brands and can have replacements fast when something niche fails. From a basic Mighty Mule on a corner-lot chain-link gate to a FAAC on a custom ornamental driveway, we’ve seen it and fixed it.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Antelope Homes
- Builder-grade hinge failure at the post. The thin galvanized hinges installed on 1980s-90s tract home gates in Antelope rust through or tear out of the post, and the gate sags. That sag throws the operator off track, and the gate starts binding. We re-set posts and install forged hinges that actually hold.
- Warped wood panels overloading slide operators. Antelope’s intense summer sun dries out the original wood gate panels, and they crack and warp. A warped panel drags on the track or binds against the post, which makes the motor work harder and eventually burn out. We re-square the leaf, brace it, or replace warped sections so the operator runs light.
- Corroded underground wiring and connections. Winter tule fog and irrigation overspray around Antelope’s front-yard landscaping causes corrosion at splice joints and in loop-detector wires. The gate opens intermittently or the keypad goes dead. We find the fault, re-splice, and seal connections against future moisture.
- Mismatched remotes and failed receivers. When a homeowner replaced a remote years ago and now nothing works, the receiver may have been from a different brand or frequency family. We identify what’s actually installed at the gate, not what the remote says, and program or replace the receiver to match.
Pricing for Electric Gate Repair in Antelope, CA
Here’s what Antelope homeowners can expect to pay, based on the work we do most often in the 95621 and 95843 ZIPs. A hinge repair with post reinforcement runs $180 – $290. Keypad or remote repair is $90 – $180. Safety sensor alignment or replacement is $140 – $250. Motor repair lands between $220 and $380, and a full operator replacement starts around $450 and climbs with brand and power. We quote the full price before any work begins, and that quote is the invoice. No travel fee surprises, no material upcharges you didn’t approve. Call (833) 620-4636 and we’ll give you a real number over the phone.
One more thing that matters to Antelope customers: we bring post-reinforcement plates and matched hardware kits on every truck. That’s because in this town, the gate failures cluster at the hinge post. The original builder-grade thin galvanized hinges and stamped latches fail in the same pattern on the same model homes, block after block. We don’t just swap a hinge and hope it holds. We reinforce the wood at the post, replace the hardware with heavier stock, and set the gate so the operator runs true. That’s the difference between a repair that lasts two years and one that lasts fifteen.
We Also Serve Cities Near Antelope
If you’re just outside Antelope, we’re still close. We run regular routes through Foothill Farms, Citrus Heights, North Highlands, and Roseville, so turnaround stays short. Whether you’re in the 95621 ZIP near Antelope proper or across the line in Foothill Farms, the same crew and the same gate-specific trucks come out. One call covers repair, automation, and full installation.
Serving Antelope, CA – Our Local Coverage Area
We’re based in the Antelope area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Antelope
Almost always the gate. In Antelope’s tract homes, the original builder-grade hinges fail at the post, the gate drops, and the operator strains against the misalignment. We repair the hinge post and hardware first, then test the operator. If the motor wasn’t overheated, that’s usually the whole fix. Call (833) 620-4636 and describe where it’s dragging; we’ll tell you what we think before we even come out.
The Sacramento Valley summers dry out and warp the original wood gate panels and posts. As the wood moves, the gate binds, and the motor has to push harder. A gate that ran fine in May can bind by August. We re-align or brace the leaf so the motor runs cool and silent even in 100-degree heat.
California requires automatic gates to have a photoelectric sensor or contact edge that reverses the gate when it hits something. Many Antelope gates built 25-35 years ago either never had them or have sensors that no longer work. We test and replace them on every repair visit, and we’ll show you exactly what’s on your gate and what needs fixing.
Corrosion in the low-voltage wiring or the keypad itself. Antelope’s winter tule fog and irrigation overspray get into splice boxes and panel terminals, and the circuit fails. We find the corroded point and re-splice or re-run the wire. It’s a common winter call in the 95621 and 95843 ZIPs.
Yes. Corner-lot chain-link gates in Antelope were built on light posts and thin strap hinges, and those rust out at the post. We replace the hinges with heavier hardware, re-set posts, and service the opener, whether it’s a Ghost Controls, a Mighty Mule, or something older. You don’t need a new gate because a hinge failed.
Written by Rodney Caldwell, Owner at Gate Repair Del Paso Park, serving Antelope and the surrounding Sacramento Valley. Electric gate specialists, not generalists.