Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Citrus Heights
Gate repair in Citrus Heights usually runs $140 – $380 for common fixes like hinge replacement, sag correction, and post re-setting, with same-week scheduling available in most cases. If your gate drags, binds, or won’t open, call (833) 620-4636 and we’ll get someone out to look. We know the gates around here because we work on them every week, from Sunrise Boulevard ranch homes to the newer developments off Antelope Road.
We’re Gate Repair Del Paso Park, and gate repair is all we do. Not fencing, not garage doors. Gates. Our Gate Repair team handles everything from a stuck Mighty Mule in a 95610 backyard to a commercial DoorKing slide gate on a Citrus Heights storefront. When your post has been pushed out of plumb by expanding clay or your operator board finally gave up after 20 Sacramento Valley summers, you want a technician who has seen that exact failure before. That’s us.
Why Gate Repair Del Paso Park Is Citrus Heights’s Preferred Gate Repair Company
Citrus Heights homeowners call us because we speak the language of what is actually installed in this area. We are not a general contractor who sends someone out to “take a look.” We send a gate technician who can name your operator brand by the sound it makes when it tries to cycle. From the older LiftMaster swing arms on Madison Avenue ranch-style homes to the FAAC and BFT operators on commercial lots near Greenback Lane, we know the failure patterns and we carry the parts for LiftMaster repair in Citrus Heights.
Response time to Citrus Heights matters. When a gate will not close and you have kids or dogs in the yard, waiting three days is not acceptable. We schedule calls in Citrus Heights based on actual drive time from our Del Paso Park base, so our arrival windows hold up. For emergency calls where a gate is stuck open, we prioritize Citrus Heights the same way we prioritize our own zip code.
Our Citrus Heights customers come back to us because we repair before we replace. That is not a slogan; it is the economics of gate work. A $40 hinge and a re-set post almost always beat a $2,400 full replacement. We will tell you when replacement is the smarter long-term spend, but we will never push it to pad the invoice. Led by Rodney Caldwell, our approach is simple: fix what is there, upgrade when it is unsafe to fix, and replace when the gate has outlived its structure.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding in Citrus Heights
Gate welding in Citrus Heights is a routine repair on older wrought-iron and steel-frame gates, especially the ones that have been exposed to 40-plus years of Sacramento Valley heat and seasonal rain. When a hinge tears off a rusted stile, or a picket breaks loose at the weld, the fix is often a mobile weld repair done on-site rather than a trip to a fabrication shop. We bring the welder to your gate in Citrus Heights, not the other way around.
Most gate welding repairs around Citrus Heights run $120 – $260, depending on the location of the break and how much metal needs to be restored. A clean hinge re-weld is on the lower end. A rusted-through bottom rail that needs cut-out and replacement sections is on the higher end. If the damage is structural, we may remove and re-weld a section before adding new hinge plates, which usually adds another hour of labor.
On-Site Weld Repair
We gas-shield weld steel and iron gates on site in Citrus Heights, which means no crane, no transport, no week of downtime. This works well for estate gates that are too heavy to remove and for commercial gates that cannot legally be off-line. The weld gets ground smooth, primed, and painted to match as closely as we can to the existing finish, which matters on older gates where the patina is part of the look.
When Welding Is Not Worth It
If the hinge post itself has rusted through at the base, welding the gate will not fix the real problem. In Citrus Heights, where galvanized posts sit directly in native adobe clay, rust at the soil line is common. We will tell you honestly when a post replacement is the only durable option, because a weld on a failing post is just a delay, not a fix.
Every welding job is priced and agreed before we strike an arc. You know the number before work starts at your Citrus Heights home.
Commercial Gate Repair in Citrus Heights
Commercial gate repair in Citrus Heights means slide gates, cantilever gates, and heavy swing gates with loop detectors, keypad entry, and safety photo eyes. These are the gates you see on storage facilities along Auburn Boulevard, apartment communities near Sunrise Mall, and small industrial lots off Roseville Road. When one of those gates fails, it is not an inconvenience; it is a security gap and usually a liability waiting for the wrong person to test it.
Commercial repair labor in Citrus Heights typically runs $180 – $400 for diagnosis and repair, with parts billed separately. A failed loop detector might be $150 to replace. A burned-out motor on a commercial slide operator could run $800 – $1,600 depending on brand and horsepower. We work on DoorKing, Elite, and FAAC commercial operators regularly, which means we usually have the common boards and limit switches on the truck so we are not ordering parts and leaving your gate inoperable for a week.
Slide Gate and Track Systems
Citrus Heights has a lot of slide gates on commercial properties where there is no room for a swing. These fail at the rollers, the chain, or the safety edge. We repair or replace track rollers, tension the drive chain, and re-set bent track on site. If the concrete pad has shifted, which happens in clay soil here, we will re-anchor and shim the track so the gate runs without dragging.
Access Control and Safety Systems
Modern code in California requires entrapment protection on automated commercial gates, and older Citrus Heights installs often predate that. We retrofit photo eyes and reverse edges onto existing operators rather than condemning a working board. That keeps your gate legal without forcing a full controller replacement. We also work with keypad and card-reader entry so we can diagnose whether the gate or the access system is actually at fault. Call (833) 620-4636 and we will come do a free site check.
Trusted Brands We Service in Citrus Heights
We factory-familiar with nine gate-operator brands, but the three we see most often in Citrus Heights backyards and storefronts are Ghost Controls, DoorKing, and Mighty Mule. The reason that matters is parts and diagnostics. A technician who only knows the gate hardware but not the operator logic will replace the wrong thing. We work on your brand, not just gates in general. We keep common boards, remotes, and safety sensors stocked for fast turnaround on Citrus Heights jobs so you are not waiting for a parts shipment from a distributor.
Common Gate Repair Problems We See in Citrus Heights Homes
- Adobe clay heaving posts: Citrus Heights sits on expansive clay that cracks wide in summer and swells with winter rain. Gate posts set without drainage heave and lean seasonally, which throws the gate out of plumb and binds the hinges. The durable fix is to re-set the post in a gravel-drained footing, not just re-tamp dirt around it.
- Seasonal wood swell and bind: The older ranch tracts around 95610 and 95621 have a lot of original redwood and picket gates. They swell in wet months and dry out in the 100-degree heat, which pulls screws, cracks boards, and makes the gate drag on the latch side. We can correct the sag and re-hang a wood gate without replacing it when the structure is still sound.
- Rusted post bases on galvanized steel: Steel posts set directly in native soil rust at the base within a couple decades. In Citrus Heights, where watering and rain leave the soil damp even in summer, we see this constantly. The post fails below ground level, and the gate starts leaning as the hinge side sinks.
- Obsolete operator boards and safety gaps: Older LiftMaster and FAAC boards from the 1990s and early 2000s are still running gates across Citrus Heights, but they lack modern entrapment protection and they fail after years of heat stress. Symptoms like the gate stopping mid-cycle or refusing to close until unplugged are classic board failures. We can often replace just the board and add safety photo eyes rather than swapping the whole operator.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Citrus Heights, CA
Here is what you can expect for common gate repairs in Citrus Heights:
- Hinge replacement and sag correction: $140 – $260
- Post re-set with gravel-drained footing: $180 – $350 per post
- Gate welding repair: $120 – $260
- Operator board replacement: $250 – $550 including parts for most residential brands
- Commercial slide gate repair: $180 – $400 labor, parts to quote
Every price is discussed and agreed before work starts. No surprise line items, no “we found something worse” phone call that doubles the bill. If we open the gate and find something unexpected, we call you, show you what we found, and get your okay before touching it. Estimates are free. Call (833) 620-4636 and we will come out and give you a written number.
We Also Serve Cities Near Citrus Heights
Our gate repair territory covers Citrus Heights and the surrounding Sacramento suburbs. We run calls in Antelope, Fair Oaks, Foothill Farms, and Roseville on a regular schedule, so a gate hanging in a Fair Oaks post-war ranch or an Antelope newer tract gets the same brand-specific service. If you are outside Citrus Heights but nearby, the service area still holds.
Serving Citrus Heights, CA – Our Local Coverage Area
We’re based in the Citrus Heights area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Citrus Heights
Most sagging gates in Citrus Heights need at least some post work, because the adobe clay here moves posts out of plumb even when the hinges are fine. We will check the post with a level before quoting new hinges. If the post has moved, new hinges alone will bind again within a season. Call (833) 620-4636 for a free assessment at your Citrus Heights home.
It depends on which failure you are seeing, but a 1990s LiftMaster in Citrus Heights is usually near the end of its affordable repair window. If the arm motor is burned out or the board is dead, replacement is almost always cheaper than chasing obsolete parts. If the failure is a limit switch or a remote receiver, a repair still makes sense. We will give you both numbers before you decide anything.
Because Citrus Heights sits on native adobe clay that expands when wet and contracts when dry, and most original gate posts were set without drainage. The soil literally moves the post season by season. The durable fix is to pull the post and re-set it in a gravel-drained footing that does not hold water, which breaks the heave cycle. Re-tamping the same clay around a leaning post will not hold.
Yes, in most cases. We bring the welder to your Citrus Heights property and repair the break where the gate hangs, especially for heavy gates that are impractical to remove. Hinge tears, cracked stiles, and rusted-out bottom rails are all common mobile weld repairs here. We grind, prime, and paint the repair to blend as closely as possible with the existing finish.
Yes, that is a standard part of our commercial work around Citrus Heights, especially along Auburn Boulevard and the industrial areas near Roseville Road. We diagnose loop detector failures, repair or replace safety edges and photo eyes, and troubleshoot keypad and card-access integration. If your gate is off-line and your tenants cannot get in, call (833) 620-4636 and we will make it a priority.
Most Citrus Heights gate repairs land between $140 and $380. Hinge replacement, sag correction, and welding are on the lower end. Full post re-sets with new footings and operator board replacements run higher. Commercial slide gates and access-control issues are separately quoted because the scope varies so much. We give you a written price before work starts, every time.
Why Adobe Clay Changes Gate Repair in Citrus Heights
Citrus Heights is not like Roseville when it comes to soil. The native adobe clay here swells in winter and shrinks in summer, and it moves gate posts in a way that sandier soils do not. A homeowner on a 1960s tract in 95621 might straighten the same post three times in five years and still end up with a dragging gate. The reason is not bad hardware. It is the footing.
We recently repaired a sagging double-wide swing gate on Sunrise Boulevard where the original galvanized hinge post had been pushed out of plumb by expanding clay. After pulling the post, we re-set it in a gravel-drained footing, corrected the sag with new heavy-duty hinges, and upgraded the LiftMaster operator with a safety photocell to meet UL 325. The gate now swings freely and the operator runs smoothly through its cycle. That is the Citrus Heights fix in one job: deal with the soil, correct the structure, and update the safety.
Older tracts off Greenback Lane and Fair Oaks Boulevard have the same profile: original wood or chain-link gates on posts set in un-drained clay, now 40 or 50 years in. Adding gravel drainage under a post is not extra work for the sake of it. It is the difference between a gate that stays true and one that leans again in two winters.
If your gate has been straightened before and it is leaning again, the post is the problem, not the hinge. Call (833) 620-4636 and we will tell you whether a re-set is worth doing or whether replacement is the cheaper path.
Written by Rodney Caldwell, Owner at Gate Repair Del Paso Park, serving Citrus Heights gate repair since our first call in the area.