Farm & ranch
Wrought iron
Wood & steel frame
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Foothill Farms, CA
Gate installation in Foothill Farms usually runs $1,800 – $7,500 depending on operator type, gate material, and whether the post has to come out of concrete. Most homes here were built between the 1950s and 1970s, so gates sit on narrow side yards where fence lines double as the main privacy barrier between ranch homes. Gate Repair Del Paso Park has served Foothill Farms since 2012, and we handle everything from a bent hinge on an old redwood gate to a full automatic driveway gate with a Viking or Ghost Controls operator. If your gate is binding, sagging, or failed at the post, call us at (833) 620-4636 for a straight answer and a free estimate.
Why Foothill Farms Homes Are Different
Foothill Farms is a mid-century suburb, and the gate work here reflects that. The housing stock is dominated by single-story ranch homes on small lots from the postwar and 1960s – 70s tract era. Fences run tight along property lines, often just feet from the driveway or a shared side yard. In these closely spaced tracts, the side-yard gate frequently sits at the end of a narrow concrete strip between two homes. We regularly find posts set directly into that concrete rather than into soil, which means a hinge replacement can turn into a post-anchoring job before the gate will swing right again.
The Sacramento Valley climate works against fence and gate hardware in specific ways. Summer heat bakes wood until it warps, and it dries out posts enough that lag bolts lose their bite. Winter rain swells the same wood and softens footings under heavier gates. The dry season also puts Foothill Farms in a high wildfire hazard zone, so a sagging gate that blocks a side-yard access path becomes more than a nuisance. What makes the work different here is matching decades-old redwood or cedar fence stock and dealing with gates that were homeowner-built or patched over the years, so post sizes and hardware vary from lot to lot.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Foothill Farms Services
The two calls we get most from Foothill Farms homeowners are for gates that no longer close right and electric operators that stopped responding. Both are covered below, and each has its own dedicated Foothill Farms page.
Gate Repair in Foothill Farms
A sagging or binding gate on a Foothill Farms side yard is usually a post issue, a hinge issue, or both. Because so many posts were set into the narrow concrete walk strips between homes, a gate that scrapes the ground in August has often pulled its post out of true in the heat. We match the existing redwood or cedar, square the post back up, and replace hinges and latches with hardware sized for the actual gate weight. Full details are on our Gate Repair in Foothill Farms page.
Electric Gate Repair in Foothill Farms
When an automated gate opens halfway, beeps but doesn’t move, or stops responding to the remote, the fault is almost always in the operator, the control board, the safety sensors, or the power run. On Foothill Farms properties, we also see weather-damaged wiring from sun exposure and rodent-chewed low-voltage lines under decks. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems without pushing a brand replacement. See Electric Gate Repair in Foothill Farms for full detail.
Gate Installation in Foothill Farms
Gate installation in Foothill Farms starts with the post. On these small ranch lots, a new gate often replaces a homeowner-built one that was screwed into whatever post was already there, and the new post has to be set properly or the gate will sag within two seasons. Most installations run $1,800 – $7,500, and we quote the full job before any work starts. Since we’re Gate Installation specialists rather than a general fencing crew, we handle the operator, the safety edges, and the power run in the same visit.
Automatic Gate Installation
Signs you need it
A manual gate you have to climb out of the car for, or a gate that gets left open because no one wants to close it at night.
What it costs in Foothill Farms
Automatic gate installation in Foothill Farms typically runs $3,500 – $9,500 depending on operator, gate weight, and power proximity.
How we do it
We set or verify the posts, hang the gate, mount the operator, run the power and control wiring, then program remotes and safety sensors with full travel testing.
Driveway Gate Installation
Signs you need it
A driveway gate that scrapes on the concrete, swings into a car door, or a property with no gate at all where the fence line ends short of the driveway.
What it costs in Foothill Farms
A new single driveway gate in Foothill Farms typically falls between $2,000 and $6,000 for a manual steel or wood gate, more for an automated one.
How we do it
We measure the driveway width and slope, set posts in concrete where the ground allows, hang the gate with adjustable hinges, and level the latch for a clean swing.
Sliding Gate Installation
Signs you need it
A driveway or side yard with no room for a swing arc, or a gate that currently drags on a broken wheel and won’t stay on its track.
What it costs in Foothill Farms
Sliding gate installation in Foothill Farms generally runs $3,500 – $9,500 depending on gate width, track type, and whether an operator is added.
How we do it
We set the track and guides, build or mount the gate panel, install rollers and stops, and if needed add an operator with a proper motor and limit switches.
What Gate Installation Costs in Foothill Farms
| Item | Typical range in Foothill Farms |
|---|---|
| Manual wood or steel gate | $300 – $1,500 |
| Automatic gate installation | $3,500 – $9,500 |
| Driveway gate installation | $2,000 – $6,000 |
How long does gate installation take in Foothill Farms?
Most manual gate installs are done in one day. An automatic gate with power run, operator mounting, and programming usually takes one to two days, and we set the schedule before work starts.
Can you install a gate on a post that’s set in concrete?
Yes. We core or break out the old concrete as needed, set a properly sized post, and wait for it to cure before hanging the gate, so the new installation doesn’t sag the way the last one did.
Brands We Service in Foothill Farms
We work on your brand, not just gates in general. That means DoorKing and Elite commercial controllers, Ghost Controls and Viking residential operators, and the rest repair-first rather than replace-first. We stock common boards, remotes, safety edges, and hinge kits locally, which keeps most Foothill Farms repairs to a single trip. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Foothill Farms, CA
| Service | Typical range in Foothill Farms |
|---|---|
| Hinge or latch replacement | $150 – $450 |
| Wood rot repair | $250 – $800 |
| Post repair or reset | $400 – $1,200 |
| Manual gate realignment | $250 – $700 |
| Picket replacement | $40 – $120 per picket |
| Electric gate diagnostic | $100 – $250 |
| Operator replacement | $900 – $3,500 |
| Keypad or intercom installation | $400 – $1,400 |
| Manual wood or steel gate | $300 – $1,500 |
| Automatic gate installation | $3,500 – $9,500 |
What pushes a Foothill Farms quote higher is usually the post. Concrete-set posts, rot below grade, or a fence line that’s drifted out of square all add labor, and we’d rather tell you that before the job than after. Every price is quoted and agreed before any work begins.
Neighborhoods We Serve in Foothill Farms
We cover all of Foothill Farms and the 95842 ZIP. Most calls come from the ranch-home tracts along the streets off Madison, Auburn, and Garfield, but we work the whole area.
- North Foothill Farms
- South Foothill Farms
- Madison Square
- Garfield tract area
- Winding Way corridor
For most gate repairs in Foothill Farms, we can have a technician there same day or next morning. Gate installation is scheduled, not rushed, and we’ll give you a date up front.
Service Area – Cities Near Foothill Farms
We also cover Antelope, CA to the north, North Highlands, CA right next door, Citrus Heights, CA to the east, and our home base in Del Paso Park, CA. If you’re on the edge of Foothill Farms and one of these cities, give us a call and we’ll confirm the address.
Serving Foothill Farms, CA – Our Local Coverage Area
We’re based in the Foothill Farms area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Foothill Farms
For repair calls in Foothill Farms, we can usually be on site the same day or next morning. Installations are scheduled ahead and get a confirmed date, not an open window.
Most residential gate repairs and like-for-like replacements don’t require a permit. New automated driveway gates may need to meet setback and safety-sensor requirements, and we’ll check the current Sacramento County rules for your specific address before any work starts.
Yes. A lot of Foothill Farms fences are original or decades-old redwood and cedar, so we match the stock and the hardware style as closely as the material allows. If the post is the problem, we replace the post and keep the existing fence pickets intact where possible.
If your gate is sagging, stuck, or dead at the keypad, call (833) 620-4636 for a free estimate. We’ll tell you what’s wrong, what it costs, and what we’d do, before anything is scheduled.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Foothill Farms Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Tiana Coleman"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Ramon Mendoza"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Neil Rhodes