Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in North Highlands, CA
Gate installation in North Highlands usually runs $1,800 to $9,500 depending on the operator, material, and whether we’re retrofitting an existing opening or building new. Most properties here were built in the 1950s and 60s, which means we’re often working with narrow driveway openings, original wrought-iron posts set too shallow, and gate hardware that predates modern safety requirements. Gate Repair Del Paso Park has served North Highlands since 2012, and we carry the multi-brand operator knowledge to install or retrofit systems without ripping out what’s already there. Call (833) 620-4636 for a free measure and a written price.
Why North Highlands Homes Are Different
North Highlands is an older Sacramento Valley suburb, and the gate work here reflects that. The ZIP 95660 housing stock is dominated by 1950s-60s single-story tract homes with detached or attached one-car garages, and many properties still have original wrought-iron or chain-link driveway gates alongside aging wood privacy fences. Those gates were built in an era before photo-eye safety sensors and battery backup were mandatory, so retrofitting modern automation onto a 60-year-old opening comes up constantly. We regularly see non-standard gate widths that require custom fitting, corroded hinges, and posts set only 18 inches into expansive clay soils. The soil is the quiet problem: after a long dry summer, the first soaking rain of November makes those shallow-set posts heave and tilt, and gates that worked fine all summer suddenly drag or refuse to latch. Summer temperatures routinely exceed 100°F, and that heat bakes wood gates until they crack and warp; winter rains swell and bind them. Around here, gate hardware needs a seasonal adjustment twice a year, not once a decade.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main North Highlands Services
Most calls we get in North Highlands fall into two buckets: a gate that’s stopped working, and an electric operator that’s stopped responding. Both are covered by dedicated pages with full pricing and detail.
Gate Repair in North Highlands
We repair gates that drag, sag, won’t latch, or have come off their track. In North Highlands, a big share of those jobs involve corroded hinges and posts that have moved in the clay soil, so the repair often includes resetting a post or refitting a latch plate to a door that no longer lines up. We work on your brand, not just gates in general, and we’ll tell you honestly when a gate has reached the end of its useful life and a repair would be throwing money away. Gate Repair in North Highlands covers pricing, same-visit repair scope, and what we stock on the truck.
Electric Gate Repair in North Highlands
When an operator hums but doesn’t move, a remote stops working, or a gate reverses for no reason, the problem is usually in the motor, control board, sensors, or wiring. North Highlands homes with aging 1950s-60s panels often have undersized or deteriorating power runs to the gate. Electric gate specialists, not generalists: we diagnose the original equipment first, and because we service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, we usually repair what’s installed rather than pushing a replacement. Electric Gate Repair in North Highlands has the full breakdown.
Gate Installation in North Highlands
New gate installation in North Highlands usually means one of two projects: replacing an original 1960s gate and post system that’s finally failed, or adding automation to a property that’s never had it. The older lots are the wrinkle: narrow driveway openings and shared driveway access mean many installations need smaller-footprint sliding operators or custom-width swing gates instead of off-the-shelf sizes. Our full Gate Installation service covers the measure, material order, concrete work, operator mounting, and safety-edge calibration so the gate passes current code. Every job is quoted as a fixed price before any work begins.
Automatic Gate Installation
Signs you need it
You want to open and close your gate from the car without getting out, or a manual gate has become too heavy to operate safely.
What it costs in North Highlands
Automatic gate installation in North Highlands typically ranges from $2,800 to $9,500, with entry-level residential operators like Ghost Controls and Mighty Mule landing at the lower end and premium systems with battery backup at the upper end.
How we do it
We measure the opening and gate weight, set or reinforce posts, mount the operator, run the power and signal wiring, then install photo-eye sensors, safety edges, and a keypad or remote system, testing the full cycle before leaving.
Driveway Gate Installation
Signs you need it
An existing driveway gate is rusted through, sagging beyond adjustment, or you want a new gate to control access to the property.
What it costs in North Highlands
A new driveway gate installation in North Highlands typically runs $2,200 to $6,300, depending on whether it’s a swing or sliding configuration, the material, and whether the existing posts can be reused.
How we do it
We pull the old gate, check the posts and concrete footings, fabricate or order a gate to the exact width of your opening, hang it, and set the latch and stops for a clean close on the first try.
Electric Gate Installation
Signs you need it
You have a gate in place but want it motorized, or you’re replacing an old operator on a gate that still swings true.
What it costs in North Highlands
Electric gate installation in North Highlands generally runs from $3,200 to $9,500 because it includes the operator, control board, safety sensors, and the electrical run from the house or a dedicated circuit.
How we do it
We mount the operator on a reinforced post or column, run a dedicated power line, wire the control board and safety devices, program the remotes and keypad, and verify the obstruction-reversal behavior under load.
What Gate Installation Costs in North Highlands
| Item | Typical range in North Highlands |
|---|---|
| Driveway gate installation (manual, single swing) | $1,800 – $4,500 |
| Automatic gate installation (residential operator included) | $2,800 – $9,500 |
| Sliding gate installation (track, motor, and safety sensors) | $3,200 – $8,200 |
Does North Highlands require a permit for a new automatic gate?
Most residential gate installations in North Highlands require an electrical permit for the operator’s power run, and setbacks from the sidewalk must be checked before the footer is poured. We handle the measurements and can advise on what the county looks for before you file.
Can you install a gate on a narrow North Highlands driveway?
Yes. We fit sliding operators that run parallel to the fence line when there isn’t room for a full swing arc, and we’ve installed custom-width gates on driveways under ten feet wide throughout the 95660 area.
Brands We Service in North Highlands
We keep a deep bench on Elite, Mighty Mule, LiftMaster, and FAAC parts for North Highlands repair calls, with stocked circuit boards, remotes, and safety sensors for the most common residential operators. Multi-brand fluency means we usually repair what’s installed rather than forcing a replacement. See our brands for the full list of nine operator lines we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in North Highlands, CA
| Service | Typical range in North Highlands |
|---|---|
| Hinge replacement or post reset | $150 – $450 |
| Gate sag correction / refit | $180 – $520 |
| Operator replacement (residential) | $650 – $1,800 |
| Control board or sensor replacement | $250 – $850 |
| Remote programming or replacement | $75 – $250 |
| Full gate removal and haul-off | $150 – $400 |
| Electric gate repair (diagnostic included) | $200 – $1,200 |
| Driveway gate installation (manual, single swing) | $1,800 – $4,500 |
| Automatic gate installation | $2,800 – $9,500 |
| Sliding gate installation | $3,200 – $8,200 |
What pushes a North Highlands quote up is usually the power run: homes built in the 1950s-60s often don’t have a spare breaker or a near-gate outlet, so we’re adding a dedicated circuit and trenching wire across a yard or driveway. The second biggest driver is post condition, because original posts set 18 inches deep in clay frequently need to be re-set deeper with new concrete before a new gate can hang. Whatever the scope, the price is agreed in writing before we start work, and that number doesn’t change on you at the end of the job.
Neighborhoods We Serve in North Highlands
We work throughout ZIP 95660, from the streets off Watt Avenue to the neighborhoods along Elkhorn Boulevard and the smaller pockets south of McClellan. Our North Highlands jobs are usually reached within a day for repairs, and we schedule installation measures around your availability.
- Highlands (original tract north of I-80)
- McClellan Heights
- Watt/Elkhorn corridor
- Waller Road area
- South of McClellan Park
Service Area – Cities Near North Highlands
Gate Repair Del Paso Park also runs daily routes into Foothill Farms, CA, Del Paso Park, CA, Antelope, CA, and Robla, CA. If you’re just over the line, call and we’ll tell you straight whether the job fits our routing for the week.
Serving North Highlands, CA – Our Local Coverage Area
We’re based in the North Highlands area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in North Highlands
For a gate stuck open or a security risk, we aim for same-day or next-day service in North Highlands. Emergency repair calls get priority routing, and we carry the most common operator parts on the truck so a single visit is usually enough.
Some older North Highlands subdivisions have restrictive covenants on fence and gate materials, especially for street-facing installations, so matching an original wrought-iron style often matters. We can build to a specific style or match the existing gate’s material so the replacement doesn’t trigger a complaint.
Yes. We measure the opening, check the post condition, and give you a written fixed price for gate installation or repair before any work begins. Call (833) 620-4636 to schedule an estimate.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What North Highlands Customers Say
"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Neil Rhodes"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Heather Gallagher"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Wade Meyer