Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Roseville
Electric gate repair in Roseville typically runs $185 – $460 for most operator and hinge failures, with whole-operator replacements in the $900 – $2,200 range depending on brand and gate length. We’re Gate Repair Del Paso Park, and we work on gates all over Roseville every week. Call (833) 620-4636 and you’ll talk to someone who knows Roseville’s gate stock cold – the builder-grade operators in 95747, the older iron in 95678, the mid-century setups in 95661. We dispatch to Roseville daily and most repairs are done same visit.
What makes Roseville different is how fast the city went up. Thousands of homes in west Roseville were built within a few years of each other in the 1990s and 2000s. That means thousands of gates are now aging out at the same time. We see the identical first-generation LiftMaster and Linear operators failing up and down single streets in 95747, which is why our LiftMaster repair in Roseville stays busy. If your gate is dead, sagging, or stuck open, the odds are good we’ve fixed the same model that same week somewhere in your subdivision.
We’re not a fencing company that also does gates. We’re Electric Gate Repair specialists – motors, control boards, safety sensors, hinges, keypads, remotes, the whole loop. If a gate opens automatically, we work on it.
Why Gate Repair Del Paso Park Is Roseville’s Preferred Electric Gate Repair Company
Roseville homeowners and property managers call us because we carry parts for nine gate-operator brands and we know which ones show up in local housing stock. That’s not a line. It’s the result of working consistently in Electric Gate Repair in Roseville where specific models repeat block after block. We know a first-generation Linear actuator from a 2001 Stoneridge home. We know the FAAC models common in the newer gated pockets of west Roseville. We know which control boards are discontinued and which aftermarket replacements actually hold up.
Rodney Caldwell leads the team, and his approach is repair-first. The company stock parts locally so Roseville jobs don’t stall waiting on shipping when a board fails mid-summer and your gate is locked shut. When we quote, the price is agreed before any work starts. No surprises on the invoice.
Response time to Roseville is a real thing we plan for. Roseville’s not a quick pop-in job from our shop, so we schedule routes with enough time to actually finish the repair, not just show up. Same-day turnaround is common for operator and hinge failures when we have eyes on the job early enough.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Commercial Gate Operator in Roseville
Commercial gate operators in Roseville run on a different duty cycle than residential units, and property managers in the city’s industrial and office zones tend to discover that at the worst possible moment. A failed commercial operator on a busy access point means tenant complaints, security exposure, and delivery delays. These units need repair from someone who understands the difference between a swing arm actuator, a slide gate motor, and a buried hydraulic operator – and who stocks or can source parts fast for LiftMaster, FAAC, BFT, Viking, and DoorKing systems.
Repair First, Replace Only When It Makes Sense
We don’t push new operators on Roseville businesses just because a part is old. If a control board can be rebuilt or a limit switch replaced, that’s what we do. The commercial units we see most often in Roseville are LiftMaster slide operators on storage facilities and industrial lots, plus a smaller number of FAAC hydraulic swing arms on office park entries. Rebuilding a commercial unit typically runs $400 – $1,100 depending on the component, while full commercial operator replacement runs $2,500 – $6,500 installed.
Preventative Checks That Avoid Downtime
Roseville property managers who call us before failure save money. We check chain tension, gear wear, limit settings, and safety loop function. A thirty-minute inspection catches the $300 problem before it becomes a $4,000 replacement. Call (833) 620-4636 to schedule a commercial gate assessment in Roseville.
Gate Opener Repair in Roseville
Gate opener repair in Roseville covers the most common call we field: the motor runs or clicks but the gate doesn’t move, or the gate opens but won’t close, or the remote stopped working entirely. In Roseville’s climate, these failures are often heat-related. Central Valley summers bake the control boards and capacitors inside operator housings. We see a spike in board failures in July and August when housing-mounted electronics hit 140 degrees inside.
Boards, Limits, and Capacitors
Most Roseville opener failures trace to three components: the control board, the limit switch assembly, or a worn capacitor. On 1990s and early-2000s units, control boards are frequently discontinued. When that happens, we explain honestly whether an aftermarket board exists or whether a full operator swap is the smarter spend. A board replacement on a current model runs $220 – $480. A full operator swap on a single swing gate typically runs $950 – $1,800 including labor and safety sensors.
Remotes and Receivers
If the opener runs the gate fine from the manual button but ignores remotes, that points to the receiver or the remote itself. We stock replacement remotes and receivers for all nine brands we service, so a Roseville call usually ends with working remotes same day. Remote programming and replacement runs $85 – $180.
Trusted Brands We Service in Roseville
We work on your brand – not just gates in general. In Roseville, the brands we touch most are LiftMaster, Linear, Mighty Mule, and Elite, because those are what the original builders installed throughout 95747, 95661, and 95678. But the full list covers all nine: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Roseville customers, we keep the fastest-moving parts local – LiftMaster boards, Linear actuators, Mighty Mule arms, Elite keypads – so a repair isn’t waiting on a UPS truck. If you have a brand we named, we can fix it without trying to sell you something else.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Roseville Homes
- Discontinued control boards from the 1990s-2000s boom. Roseville’s master-planned build-out put thousands of first-generation operators on the same timeline. When those boards die now, the part is often out of production, which means the right fix is usually a modern operator swap rather than a board patch.
- Sagging gates the result of worn hinge posts. Roseville’s hot, dry summers and wet winters swing wood and vinyl through wide expansion cycles. Builder-grade hinge posts loosen, the gate drops, and the operator strains until it burns out. We cut the post footing, reset plumb, and replace hinges before the operator fails too.
- Pre-UL 325 gates without safety sensors. Gates installed before UL 325 rules took full effect often lack photocells or edge sensors. That’s an entrapment hazard, especially for families with kids or pets. We retrofit photocell pairs and edge sensors onto existing operators, and we quote that work clearly before touching the gate.
- Heat-baked electronics in west Roseville’s full-sun exposures. Many 95747 gates face open southern or western exposure with no shade. Operator housings cook in summer. We see swollen capacitors and dead boards in July. Our repair includes testing and replacing heat-stressed components, not just the one part that showed the symptom.
Pricing for Electric Gate Repair in Roseville, CA
Electric gate repair in Roseville breaks down into predictable ranges. A service call and on-site diagnosis runs $75 – $125, credited toward the repair if you proceed. Hinge and post corrections run $185 – $420 depending on gate weight and how far out of plumb it’s dropped. Keypad repair or replacement runs $120 – $280. A residential control board replacement runs $220 – $480. Full operator replacement on a single swing gate runs $950 – $1,800. Slide gates run higher, $1,800 – $3,500. A complete new gate plus operator runs $3,800 – $9,000 depending on material and length. We quote every Roseville job upfront, so you know the number before we turn a wrench. Call (833) 620-4636 for a free estimate.
We Also Serve Cities Near Roseville
In addition to Roseville, our crews cover Roseville‘s neighbors: Rocklin, Citrus Heights, Antelope, and Foothill Farms. Same scheduling and same brand coverage apply across the whole corridor. If you’re on the edge of a service area, call (833) 620-4636 and we’ll confirm dispatch.
Serving Roseville, CA – Our Local Coverage Area
We’re based in the Roseville area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Roseville
If the operator is from the original 1990s or early 2000s build and the control board has failed, replacement is usually the better spend because those boards are discontinued and aftermarket options are unreliable. If the failure is mechanical – a limit switch, hinge, or capacitor – repair makes sense and runs $185 – $480. We’ll give you an honest read before you spend anything. Call (833) 620-4636 for a straight answer.
Roseville’s seasonal heat and rain cycles loosen builder-grade hinge posts over 15-30 years, and a sagging gate is almost always repairable without replacing the gate itself. We reset the post in new concrete, replace the hinges, and re-hang the gate plumb. That work runs $185 – $420 in Roseville. If we catch it early, your operator survives too.
When the opener motor runs but the gate stays put, the most likely culprits are a sheared or worn drive gear, a disconnected actuator arm, or a failed capacitor that isn’t delivering starting torque. In Roseville’s summer heat, capacitors fail frequently. We diagnose this on-site and quote the fix before any parts come off the gate.
Any automatic gate installed after UL 325 requirements took effect should have safety photocells or edge sensors. Many Roseville gates from the 1990s-2000s boom predate those rules and have nothing. Regardless of code, we recommend retrofitting optical sensors on any automatic gate – it’s a real entrapment hazard without them, especially for kids and pets. Retrofitting a photocell pair runs $180 – $320.
Yes. We repair commercial gate operators across Roseville’s industrial, office, and storage areas. Brands covered include LiftMaster, FAAC, BFT, Viking, and DoorKing. Commercial rebuilds run $400 – $1,100, and full commercial operator replacement runs $2,500 – $6,500. Call (833) 620-4636 to get a Roseville commercial gate repair scheduled.
Written by Rodney Caldwell, Owner at Gate Repair Del Paso Park, serving Roseville and the surrounding areas since the company’s founding.