Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Roseville, CA
Gate installation in Roseville runs $1,800 to $7,500 for most residential driveway and pedestrian gates, depending on material, automation, and site prep. We install automatic, electric, sliding, and driveway gates throughout 95661, 95678, and 95747. Call (833) 620-4636 for a free on-site estimate with the price quoted and agreed before any work starts.
Why Roseville Homes Are Different
Roseville’s housing stock spans three distinct eras, and each one fails differently. The 1920s-50s bungalows around old downtown 95678 have narrow driveways and older iron pedestrian gates that seize at the hinges. The 1970s-80s tracts in 95661 have steel tube gates with powder coat that’s now peeling, exposing the metal to winter rain and summer heat. The biggest cluster, though, is the 1990s-2000s master-planned expansion of 95747, where builder-grade vinyl and iron driveway gates with first-generation openers are hitting the 15-30 year mark together. Entire subdivisions in west Roseville age into the same failures at the same time: sagging panels, dead operator motors, and control boards that have been discontinued for a decade. Roseville’s Central Valley summers bake metal gates through wide expansion and contraction cycles, loosening hinge bolts and warping vinyl panels, while winter rain swells wood posts and rusts unprotected steel. The dry seasonal swings drive most sag, rack, and stuck-latch calls we get.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Roseville Services
Most Roseville homeowners call us for one of two reasons: a gate that won’t open, or a gate that needs to be installed. We handle both as a dedicated gate and automation shop.
Gate Repair in Roseville
Roseville’s older neighborhoods keep us busy with sagging iron gates, seized hinges, and latch strikes that no longer line up after years of seasonal movement. In 95747, the work shifts to vinyl gate panels and builder-installed hardware that’s now discontinued. See the full scope of repair work on the Gate Repair in Roseville page.
Electric Gate Repair in Roseville
When an automatic gate stops responding to the remote, the problem is usually in the operator: a dead capacitor, a failed control board, or a sensor knocked out of alignment. Roseville’s summer heat accelerates capacitor wear, and first-generation openers installed in the 1990s-2000s boom are failing on a predictable timeline. The Electric Gate Repair in Roseville page covers the diagnostic process and costs in detail.
Gate Installation in Roseville
Gate installation in Roseville typically ranges from $1,800 for a basic single-swing vinyl pedestrian gate to $7,500 for a commercial-grade sliding driveway gate with full automation. This service matters here because the city’s 1990s-2000s subdivisions are aging out of their original builder-issue gates, and many homeowners want a replacement that matches the masonry-pillar entry style common in 95747. Roseville’s summer heat and winter rain cycles mean a properly set post depth and a well-built hinge system are the difference between a gate that lasts 5 years and one that lasts 20. We install what fits the existing opening: new posts where needed, new panels, new operators, and safety edges. See our Gate Installation service page for the full breakdown.
Automatic Gate Installation
Signs you need it
You have a manual gate and want remote access from the car, or your old operator is dead and not worth rebuilding.
What it costs in Roseville
Automatic gate installation in Roseville typically runs $2,500 to $5,500 depending on the operator brand, gate weight, and whether new wiring is needed.
How we do it
We mount the operator, run the power and control wiring, install safety photo eyes and edge sensors, program the remotes and keypad, and test the full open-close cycle under load.
Driveway Gate Installation
Signs you need it
Your current driveway gate sags past repair, or you want to close off a driveway that’s currently open to the street.
What it costs in Roseville
Driveway gate installation in Roseville typically runs $2,000 to $6,500 for a single swing or slide gate, with masonry-pillar work adding to the upper end.
How we do it
We set posts to a depth that handles Roseville’s seasonal ground movement, hang the gate, install the operator and safety sensors, and set the travel limits so the gate opens and closes without binding.
Sliding Gate Installation
Signs you need it
Your driveway slopes or is too short for a swing gate, so a cantilever or track-style slide gate makes more sense.
What it costs in Roseville
Sliding gate installation in Roseville typically runs $3,000 to $7,500 because the gate frame, track or cantilever hardware, and operator all cost more than a comparable swing setup.
How we do it
We pour or anchor the track base, set the gate on its rollers, mount the operator, install the safety edges and photo eyes, and test slide speed and stop points under full load.
What Gate Installation Costs in Roseville
| Item | Typical range in Roseville |
|---|---|
| Pedestrian gate, vinyl or iron | $800 – $2,200 |
| Single driveway gate, no automation | $1,200 – $2,800 |
| Automatic driveway gate, operator included | $2,500 – $5,500 |
| Sliding gate, cantilever or track | $3,000 – $7,500 |
Do I need a permit to install a gate in Roseville?
Roseville requires permits for gates that affect driveway entry or exceed certain height limits, and many HOAs in 95747 have approval steps for any visible gate change.
Can you match the builder-era gates in West Roseville?
Yes. We replace discontinued builder hardware with current equivalents that fit the same post spacing and mounting pattern, so the new gate doesn’t require re-pouring the driveway or posts.
Brands We Service in Roseville
We carry factory-level working knowledge of Viking, Ghost Controls, DoorKing, and Elite, plus five more major operator brands. That means we repair what’s already installed rather than pushing a replacement. For parts we don’t stock on the truck, Roseville jobs usually see them within one to two business days. See our brands page for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Roseville, CA
| Service | Typical range in Roseville |
|---|---|
| Gate repair, basic (hinge, latch, weld) | $150 – $450 |
| Gate repair, panel replacement | $300 – $900 |
| Electric gate diagnostics | $90 – $180 |
| Control board replacement | $250 – $650 |
| Operator motor replacement | $400 – $1,200 |
| Safety sensor or photo eye replacement | $150 – $350 |
| Pedestrian gate installation | $800 – $2,200 |
| Single driveway gate, no automation | $1,200 – $2,800 |
| Automatic driveway gate | $2,500 – $5,500 |
| Sliding gate, cantilever or track | $3,000 – $7,500 |
What pushes a Roseville gate job toward the top of these ranges is usually the age of the original install: discontinued hardware, rotted posts, and wiring that was always undersized for the load. You get the full price before we start, and it doesn’t change unless you approve a change in scope.
Neighborhoods We Serve in Roseville
We cover all of Roseville, from the older downtown core to the master-planned westside. Most repair calls in Roseville can be scheduled same-week, and many emergency no-open situations get same-day service.
- Downtown Roseville / 95678
- Cherry Glen area / 95661
- Blue Oaks / 95747
- Westpark / 95747
- Fiddyment Farm / 95747
Service Area – Cities Near Roseville
Beyond Roseville, Gate Repair Del Paso Park covers the surrounding Sacramento-area communities. We work regularly in Rocklin, CA, Citrus Heights, CA, Antelope, CA, and Foothill Farms, CA. Same-week scheduling applies across the service area.
Serving Roseville, CA – Our Local Coverage Area
We’re based in the Roseville area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Roseville
For a gate stuck closed across a driveway, we can usually dispatch same-day if you call before early afternoon. A gate stuck open is a next-day job in most cases. Call (833) 620-4636 and describe what the gate is doing, and we’ll tell you straight when we can be there.
Many 95747 and 95678 subdivisions have HOAs that require written approval before any gate or fence change visible from the street. Most accept a spec sheet and photo of the proposed gate. We can provide the spec sheet for your installer submittal as part of the estimate.
No. On-site estimates for gate installation and repair are free. The price is quoted and agreed before any work starts, and we don’t add trip or fuel charges within Roseville’s 95661, 95678, and 95747 ZIP codes. An electric gate diagnostic carry a $90 to $180 fee that’s credited toward the repair if you approve the work. Call (833) 620-4636 to schedule.
Need a gate installed, repaired, or automated in Roseville? Call Gate Repair Del Paso Park at (833) 620-4636 for a free estimate. We serve Roseville since 2012 with repair-first thinking and factory-level knowledge of nine major operator brands.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Roseville Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Brian Vaughn"Photo eye was misaligned so the gate refused to close after dark. Ten minute fix. He also cleaned the lens and pointed out that the sprinkler head was spraying it every morning, which is why it kept happening."
- Gilbert Martinez"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Arjun Patel