Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Citrus Heights, CA
Gate installation in Citrus Heights usually runs $1,800 – $7,500 depending on whether you’re replacing a sagging wood gate on the original 1960s posts or putting in a new automated steel driveway gate. Most of our work in 95610, 95611, and 95621 involves gates that were hung decades ago on galvanized posts set in adobe clay, which shifts seasonally and pulls posts out of plumb. We handle the full gate lifecycle, from emergency repair to a complete new installation with automation. Call (833) 620-4636 when your gate stops behaving, and we’ll tell you honestly whether it’s a repair or a replacement job.
Why Citrus Heights Homes Are Different
Citrus Heights was built out mostly between the 1950s and 1970s, and the gate stock reflects that era. We see a lot of original redwood and chain-link gates hung on galvanized steel posts that have now been through 40 or 50 Sacramento Valley summers, and those posts are often rusted through at the base or leaning because the native adobe clay around them cracks in July and turns slick in January. Mature Black Walnut and Valley Oak trees line older tracts near Sunrise Boulevard, and their roots push against post footings while limbs come down onto gates during winter storms and the dry-season winds. The practical result in Citrus Heights is that re-setting a post in a gravel-drained footing is just as common as replacing the gate panel itself. Wide frontage lots in the older tracts also mean a lot of double-wide driveway gates, which changes the hardware sizing and the operator requirements compared to a standard single walk gate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Citrus Heights Services
The two calls we get most often in Citrus Heights are for gates that won’t open and electric operators that stopped responding. Here’s what each job looks like locally.
Gate Repair in Citrus Heights
Sagging wood gates, rusted hinges, and posts leaning out of plumb are the recurring patterns in Citrus Heights, especially in the 1950s and 1960s tracts where the original posts are still in the ground. We straighten what can be saved, replace what’s rotted or rusted beyond use, and re-set posts in gravel-drained footings so the adobe clay doesn’t push them around next season. If you’ve got a gate dragging on the concrete or a post pulling away from the fence line, our Gate Repair in Citrus Heights page covers what the job involves and what it typically costs.

Electric Gate Repair in Citrus Heights
Automatic gate operators fail in predictable ways: burnt control boards after summer heat and power surges, stripped gears, dead remotes, misaligned safety sensors. In Citrus Heights, we also see clay-soil shift knock the gate track or the photo-eye brackets just enough to trip the safety circuit and stop the gate mid-cycle. We carry parts and working knowledge for nine operator brands, so we diagnose the board or the sensor rather than guessing. For a stuck or beeping operator, our Electric Gate Repair in Citrus Heights page walks through common symptoms and repair costs.

Gate Installation in Citrus Heights
Most gate installations in Citrus Heights are replacements for gates that have finally failed after decades on original posts, plus a steady share of new automated driveway gates on the wider lots along Sunrise Boulevard and the older tracts. Citrus Heights’ clay soil and hot, dry summers mean a new gate is only as good as the footing under it, so we set posts in gravel-drained concrete footings that resist the seasonal heave that racks older gates. Whether you’re replacing a tired wood gate or adding a full automated entry, we handle the complete job: Gate Installation from footing to final operator programming.
Automatic Gate Installation
Signs you need it
You’re tired of getting out of the car to open the gate, or your existing operator has failed and the gate itself is still in decent shape.
What it costs in Citrus Heights
Automatic gate installation in Citrus Heights typically runs $3,500 – $7,500 for a single swing or sliding gate with operator, wiring, and safety edges.
How we do it
We set or verify the posts, mount the operator and control board, run the power and low-voltage wiring, install safety sensors and photo-eyes, then program remotes and keypads and test the full cycle.
Driveway Gate Installation
Signs you need it
Your existing driveway gate is rusted, rotted, or so far out of plumb that re-hanging it would cost more than replacing it.
What it costs in Citrus Heights
A new driveway gate in Citrus Heights typically runs $1,800 – $5,000 depending on width, material, and whether you add automation.
How we do it
We measure the opening, remove the old gate and hardware, set new posts in gravel-drained footings, hang the gate, and adjust hinges and latches so it swings clean and closes solid.
Sliding Gate Installation
Signs you need it
Your driveway slopes or curves in a way that makes a swing gate impractical, or you need to preserve every foot of parking space inside the gate.
What it costs in Citrus Heights
Sliding gate installation in Citrus Heights typically runs $4,000 – $9,500 including track, motor, and safety loops, which reflects the longer track runs on wide Sunrise Boulevard frontage lots.
How we do it
We set the track and cantilever or V-wheel hardware, mount the gate panel, install the motor and rack, wire the safety loops and photo-eyes, then tune the travel limits and force settings.
What Gate Installation Costs in Citrus Heights
| Item | Typical range in Citrus Heights |
|---|---|
| Wood gate replacement (single walk or drive) | $700 – $2,200 |
| Automated single swing gate with operator | $3,500 – $7,500 |
| Sliding gate with operator and track | $4,000 – $9,500 |
How long does a gate installation take in Citrus Heights?
Most residential gate installations take one to two days once materials are on site. Custom steel or sliding gates may need a week or more for fabrication. We give you a written timeline with the quote.
Do I need a permit to install a gate in Citrus Heights?
Most residential gate replacements on existing posts don’t require a permit, but new automated driveway gates near the street often do. We flag permit requirements during the estimate so nothing gets missed. Call (833) 620-4636 and we’ll check your property specifics.
Brands We Service in Citrus Heights
We work on your brand, not just gates in general. In Citrus Heights we regularly service Ghost Controls, DoorKing, Elite, and Mighty Mule operators, plus the full range of LiftMaster, FAAC, BFT, Linear, Viking, and Ghost Controls systems. Because we’re gate automation specialists, our trucks carry control boards, remotes, safety sensors, and common parts for our brands, so many repairs finish in a single visit instead of waiting on a shipped part.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Citrus Heights, CA
| Service | Typical range in Citrus Heights |
|---|---|
| Gate repair (hinges, post reset, sagging panel) | $175 – $600 |
| Electric gate diagnostic and repair | $250 – $800 |
| Control board replacement | $450 – $1,200 |
| Operator motor replacement | $600 – $1,400 |
| Keypad and remote programming or replacement | $150 – $450 |
| Wood gate replacement | $700 – $2,200 |
| Automatic gate installation with operator | $3,500 – $7,500 |
| Sliding gate installation with operator and track | $4,000 – $9,500 |
In Citrus Heights, the biggest price movers are post condition and soil. If the adobe clay has heaved a post out of plumb or root growth has pushed the footing, the job includes extra excavation and re-setting before any hardware goes on, which adds labor but prevents a repeat failure in two seasons. Every quote is given and agreed before we start, so the number you approve is the number you pay.
Neighborhoods We Serve in Citrus Heights
We cover all of Citrus Heights, including the older tracts where original gates are failing and the newer vinyl and wrought-iron replacements that need operator upgrades.
- Arcade Creek neighborhoods
- Rusch Park area
- Sunrise Boulevard corridor
- Sylvan Corners
- Antelope Road tracts
Most Citrus Heights calls get a same-day or next-day response, and emergency gate failures are prioritized throughout 95610, 95611, and 95621.
Service Area – Cities Near Citrus Heights
Our service area runs through the northeast Sacramento Valley, so we regularly handle gate work in Antelope, CA, Fair Oaks, CA, Foothill Farms, CA, and Roseville, CA. If you’re a property manager handling gates at multiple locations across the area, one call covers all of them.
Serving Citrus Heights, CA – Our Local Coverage Area
We’re based in the Citrus Heights area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Citrus Heights
For a gate stuck open or a driveway gate that won’t close, we prioritize Citrus Heights calls for same-day response where possible. Most non-emergency repairs in 95610, 95611, and 95621 are scheduled within one to two days. Call (833) 620-4636 and we’ll give you a straight answer on timing.
Yes. Many Citrus Heights neighborhoods have HOA-governed entry gates and shared driveway gates, and we work directly with property managers on maintenance and repair schedules. We can also bring an association’s existing gate hardware up to current safety-sensor standards without replacing the whole system.
That’s our default approach. Our technicians have working knowledge of nine gate-operator brands including Ghost Controls, DoorKing, Elite, and Mighty Mule, so we repair what’s already on your posts before recommending replacement. We only suggest new equipment when the existing hardware is beyond economical repair.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Citrus Heights Customers Say
"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Heather Gallagher"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Wade Meyer"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Brian Vaughn